| Machine type | RL6000 |
| Annual capacity | 6000 (mt) |
| Diameter of casting rod | φ 8 (mm) |
| Dragging way | Friendly interface PLC computer control, AC servo motor drive |
| Dragging and clamping | Cylinder clamping or mechanical clamping |
| Dragging pitch | 2mm - 7mm adjustable |
| Take up looped specification | Φ800mm x Φ1500mm |
| Annual working time | 8000 hours |
| Service voltage | 3 Phase, 380V - 480V, 50Hz |
| Molten copper power consumption | 320 (kwh/ton) |
| Casting rod size and capacity | φ8 is about 20 ton/day |
| Compressed air | 0.4 - 0.6 MPa |
| Installed capacity | 250 (kva) |
| Number of upper lead casting rod | 12 |
| Charcoal | ±1.5 (mm) |
| Level tracking accuracy | 60 (mt) |
Technological Process
Electrolytic copper(extruder packaging materials )---melting
furnace---controlling sluice valve---transition bin---holding
furnace---continuous casting device(crystallizing and
molding)casting rod---traction machine---the rolling velocity
controller---coiler---sell or further processing
Electrolytic copper and f packaging materials are directly added
into melting furnace, through power frequency induction melting
into liquid. Then turn off the sluice valve of melting furnace.
When it’s qualified after test, make the melted. The copper liquid
steadily flows into holding furnace diaphragms through transition
sluice valve. At the same time, the surface charcoal can ensure the
copper liquid has a stable reduction process. After finishing the
process of reduction, copper liquid flows into holding furnace and
the graphite phosphorus slice can isolate oxygen. Through the
holding furnace wall flows into crystallizer, and then the servo
motor of the continuous casting machine drag, drawing the copper
rod and pause then quickly crystallize into casting rod, through
the wheel frame and the line spacing device of coiler change
frequency and limit the speed to lead to double head wind round
coiler’s take up stand.
Product Photos
Our Company
Dongguan Wiremac Machinery Equipment Co., Ltd. Is located in Houjie
Town, a famous historic town in China. Our company is a wire and
cable equipment manufacturer integrating R&D, processing,
assembly, commissioning and after-sales.
The company is committed to copper wire, copper clad steel, copper
clad aluminum and other metal wire deep processing and research,
with a variety of high quality machines: micro wire drawing
machine, fine wire drawing machine, fine wire drawing machine with
continuous annealing, medium fine wire drawing machine,
intermediate wire drawing machine, intermediate RBD wire drawing
machine and copper rod breakdown machine.
Our company provides a complete set of wire processing solutions
for customers, but also customize and design non-standard special
equipment according to the requirements of customers.
Our company upholds the spirit of “Honesty-based, Quality-based”
enterprise, and continue to research and develop innovation and
development, with professional skills and standardized pragmatic
management, in line with the “High-quality and High-efficiency”
business philosophy, from the overall planning, staff training,
installation and commissioning, after-sales service, to provide
customers with better and more satisfactory products and service.
Our Workshop
FAQ
1. Q: Are you manufacturer or trading company?
A: We are a manufacturer.
2. Q: What info you need before you make the proposal?
A: The input & output wire diameter, spool size, application, 3
phase voltage & frequency, annealing or not, and your other
requirement.
3. Q: How can I trust you and make a payment to you?
A: (1) We are an audited supplier by international SGS, with its
certificate. They approve that we are an original manufacturer and
meet their standard.
(2) We are a member of Made in China, who is always responsible for
all customers.
(3) Please visit us and check our factory by video, and request
necessary documents from us.
4. Q: I have no experience buying something abroad. What can I do?
A: We will guide and show you how to do the importation, you can
also seek help from your local agency.
5. Q: Do you provide installing and debugging overseas?
A: Overseas machine installation and worker training services are
available.
6. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most
suitable design and production plan for the machine that you are
going to book with us.
7. Q: How does your factory do regarding quality control?
A: There is zero tolerance to poor quality. Quality control
complies with SGS & ISO 9001. Every machine has to past testing and
trial running before it's packed for shipment.
8. Q: How can I trust you that machines pasted testing and trial
running before shipping?
A: 1) We record the testing videos for you, and every necessary
photos for you.
2) We welcome you to visit us and test machine by yourself in our
factory.
9. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas
services by skillful technicians.
10. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales
service. Also we can help you with material purchase, worker
training, etc.
11. Q: Can I visit you factory to check machines on-site? What
Should I bring when I visit your factory?
A: We are manufacturer, and welcome customers to visit us. For
special product design, you are suggested to bring some samples,
you can test it with our machines on-site.
12. Q: Can I use my own logo?
A: No problem, please inform us.
